Opto Engineering® - 20 years
Home Cameras Area Scan Cameras COE-G series
COE-123-M-POE-080-IR-C
Specifications
Downloads
Compatible products
Sensor specifications
Megapixel 12.3
Resolution 4096 x 3000
Sensor format 1.1"
Active area (mm) 17.5
Pixel size (μm) 3.45
Sensor model IMX304
Sensor type CMOS
Shutter Global
Chroma Mono
Camera specifications
Filter AR
Frame rate (1) (fps) 9.4
Exposure time 1 μs - 10 s
Dynamic range (dB) 74.2
Gain range (dB) 0-20
SNR (dB) 40.0
Image buffer (MB) 128
Pixel formats Mono 8/10/ 10Packed/ 12/12Packed
Chunk data yes
User sets 3
Timers/Counters 0/1
Synchronization Free run, software trigger, hardware trigger
Connectivity and electrical specifications
Data connector RJ45
Data interface 1 GigE
I/O connector 6-pin Hirose
I/O interface 1x opto-isolated input, 1x opto-isolated output, 1x bi-directional non-isolated
Serial interface no
Encoder interface no
Power supply (V) 12, PoE
Max power consumption (2) (W) 4.3
Compliance and reliability
Standards GigE Vision, GenICam
Client software OECS or other GigEVision software
Operating systems 32/64-bit Windows XP/7/10
Warranty (years) 1
Mechanical specifications
Mount C
Dimensions (mm) 44 x 29 x 68
Clamping system 4x M3 threaded holes (on one side)
Mass (g) 100
Environmental specifications
Operating temperature (°C ) 0-50
Storage temperature (°C ) -30-+70
Operating relative humidity (%) 20-80, non condensing
IP rating IP30

Last update 02 Aug 2023

CE
ROHS
REACH
WEEE
UKCA

Notes

  1. Color-model's fps are calculated using RGB8 pixel format
  2. Measured at 12VDC

Ordering information

Further models are available upon request: contact us to discuss your specific needs.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

COE-G GigE User Manual

Software

Opto Engineering Camera Studio v1.2.0 (build 220408)
Opto Engineering Camera Studio v1.1.0 (build 210422)

Firmware

Firmware COE-004-C-POE-030-IR-C v3.4.54 (build 211202)
Firmware COE-004-C-POE-030-IR-C v3.4.54 (build 211129)
Firmware COE-013-M-POE-040-IR-C v3.4.42 (build 220620)
Firmware COE-013-C-POE-040-IR-C v3.4.42 (build 220620)
Firmware COE-016-M-POE-022-IR-C v4.0.4 (build 220304)
Firmware COE-016-C-POE-022-IR-C v4.0.4 (build 220304)
Firmware COE-023-M-POE-070-IR-C v4.0.16 (build 221122)
Firmware COE-023-C-POE-070-IR-C v4.0.16 (build 221122)
Firmware COE-032-M-POE-050-IR-C v4.0.18 (build 221230)
Firmware COE-032-C-POE-050-IR-C v4.0.18 (build 221230)
Firmware COE-050-M-POE-060-IR-C v3.4.54 (build 211228)
Firmware COE-050-C-POE-060-IR-C v3.4.54 (build 211228)
Firmware COE-089-M-POE-070-IR-C v2.8.6 (build 190123)
Firmware COE-089-C-POE-070-IR-C v3.1.1 (build 200717)
Firmware COE-122-M-POE-050-IR-C v4.0.5 (build 220506)
Firmware COE-122-C-POE-050-IR-C v4.0.4 (build 220126)
Firmware COE-123-M-POE-080-IR-C v3.1.1 (build 200717)
Firmware COE-123-C-POE-080-IR-C v3.1.1 (build 200717)
Firmware COE-200-M-POE-080-IR-C v3.4.56 (build 220825)
Firmware COE-200-C-POE-080-IR-C v3.4.55 (build 220310)

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
TC3MHR016-C
High resolution telecentric lens for 1.1" sensors, magnification 0.850x, C mount
TC3MHR024-C
High resolution telecentric lens for 1.1" sensors, magnification 0.564x, C mount
TC3MHR036-C
High resolution telecentric lens for 1.1" sensors, magnification 0.392x, C mount
TC3MHR048-C
High resolution telecentric lens for 1.1" sensors, magnification 0.303x, C mount
TC3MHR056-C
High resolution telecentric lens for 1.1" sensors, magnification 0.259x, C mount
TC3MHR064-C
High resolution telecentric lens for 1.1" sensors, magnification 0.227x, C mount
TC3MHR080-C
High resolution telecentric lens for 1.1" sensors, magnification 0.182x, C mount
TC3MHR096-C
High resolution telecentric lens for 1.1" sensors, magnification 0.153x, C mount
TC3MHR120-C
High resolution telecentric lens for 1.1" sensors, magnification 0.118x, C mount
TC3MHR144-C
High resolution telecentric lens for 1.1" sensors, magnification 0.100x, C mount
TC3MHR192-C
High resolution telecentric lens for 1.1" sensors, magnification 0.075x, C mount
TC3MHR240-C
High resolution telecentric lens for 1.1" sensors, magnification 0.059x, C mount
TCCR3M048-C
Telecentric CORE lens for 1.1" sensors, magnification 0.303x, C mount, WD 132.9 mm
TCCR3M056-C
Telecentric CORE lens for 1.1" sensors, magnification 0.259x, C mount, WD 157.8 mm
TCCR3M064-C
Telecentric CORE lens for 1.1" sensors, magnification 0.227x, C mount, WD 181.9 mm
TCCR3M080-C
Telecentric CORE lens for 1.1" sensors, magnification 0.182x, C mount, WD 226.8 mm
TCCR3M096-C
Telecentric CORE lens for 1.1" sensors, magnification 0.153x, C mount, WD 278.6 mm
TCCR3M120-C
Telecentric CORE lens for 1.1" sensors, magnification 0.118x, C mount, WD 334.6 mm
TCCP3MHR144-C
Ultra compact bi-telecentric lens for matrix detectors up to 1.1″, magnification 0.086x
TCCP3MHR192-C
Ultra compact bi-telecentric lens for matrix detectors up to 1.1″, magnification 0.064x
TCCP3MHR260-C
Ultra compact bi-telecentric lens for matrix detectors up to 1.1″, magnification 0.053x
MCSM1-01X
Variable macro lens with Scheimpflug adjustment
CB series
CB series
Cables
CBETH003
Ethernet cable, CAT6, industrial level,high flexible cable with screw, 5 m
Request a quote
Add this product to the quote request list.